基于编码矩阵识别的高速空时分组码技术

正交空时分组码和准正交空时分组码的编码速率≤1,为使空时分组码能够应用在高速传输的场合,本文提出了一种基于编码矩阵识别的高速空时分组码设计方法。该方法通过在发送端发送不同的编码矩阵表示不同的附加信息,能够实现大于1编码速率,仿真分析结果表明,在高信噪比条件下该方法使编码速率达到了2.5,并具有良好的有效吞吐容量,特别适合无线高速数据传输。     

一种基于两级均衡的超Nyquist码元速率接收方案

1975年MAZO提出超Nyquist码元速率(FTN)理论,通过理论推导证明,信号在加性高斯白噪声信道下,以超过Nyquist码元速率25%以内的速率进行传输,误码性能可以不下降。但MAZO以及至今都没人能完成FTN的接收,因为当信号以超Nyquist码元速率进行传输所引起的码间串扰长度无限长,若要完全消除码间串扰,使用最大似然检测(MLSE)方法,其复杂度无穷大,是不可实现的。基于MMSE均衡和WCE均衡级联的两级均衡已证明在长码间串扰信道下其误码性能接近于MLSE。文章将两级均衡运用于FTN接收,仿真证明在加性高斯白噪声信道下,信号以超过Nyquist码元速率25%以内的速率进行传输,误码性能不下降。成功实现FTN的接收,验证了MAZO的理论。     

Recent advances in catalytic combustion of AP-based composite solid propellants

Composite solid propellants (CSPs) have widely been used as main energy source for propelling the rockets in both space and military applications. Internal ballistic parameters of rockets like characteristic exhaust velocity, specific impulse, thrust, burning rate etc., are measured to assess and control the performance of rocket motors. The burn rate of solid propellants has been considered as most vital parameter for design of solid rocket motors to meet specific mission requirements. The burning rate of solid propellants can be tailored by using different constituents, extent of oxidizer loading and its particle size and more commonly by incorporating suitable combustion catalysts. Various metal oxides (MOs), complexes, metal powders and metal alloys have shown positive catalytic behaviour during the com-bustion of CSPs. These are usually solid-state catalysts that play multiple roles in combustion of CSPs such as reduction in activation energy, enhancement of rate of reaction, modification of sequences in reaction-phase, influence on condensed-phase combustion and participation in combustion process in gas-phase reactions. The application of nanoscale catalysts in CSPs has increased considerably in recent past due to their superior catalytic properties as compared to their bulk-sized counterparts. A large surface-to-volume ratio and quantum size effect of nanocatalysts are considered to be plausible reasons for improving the combustion characteristics of propellants. Several efforts have been made to produce nanoscale combustion catalysts for advanced propellant formulations to improve their energetics. The work done so far is largely scattered. In this review, an effort has been made to introduce various combustion catalysts having at least a metallic entity. Recent developments of nanoscale combustion catalysts with their specific merits are discussed. The combustion chemistry of a typical CSP is briefly discussed for providing a better understanding on role of combustion catalysts in burning rate enhancement. Available information on different types of combustion nanocatalysts is also presented with critical comments.     

主方差分析方法

该文提出一种对高维随机向量 X=( x1 ,x2 ,… ,xp)′p× 1 进行降维处理的实用方法 ,其基本思想是利用矩阵的扫描运算 ,构造 X的很少几个综合指标 (称为主方差变量 )以反映 X的统计特性。给出了该方法的理论依据和直观解释以及算法。特别指出 ,当变量 X多重相关性突出时 ,该文方法显著地优于主成分分析方法。     

对Reimer-Tiemann反应的改进

传统的Reimer-Tiemann反应产率不高(一般低于35%).通过改进反应条件,控制反应过程,使产率提高到60%,并对反应中的有关问题进行了讨论.     

一种基于机载SAR原始回波的多普勒参数估计方法

多普勒参数的估计精度直接影响机载合成孔径雷达系统(SAR)成像质量。根据平均后的方位谱来估计多普勒中心频率,通过计算子图像之间的位移值来估计多普勒调频斜率。为了消除在实际应用中各种干扰的影响,采用了对原始回波数据加窗的方法来提高对估计的准确性。该算法的估计结果可以用于补偿载机运动误差引入的相位误差,从而实现高分辨率成像。通过使用实验数据进行分析,验证了该方法的有效性。     

角速率火控系统计算延迟问题的研究

提出解决角速率火控系统计算延迟问题的两种方法,为深入研究角速率火控计算进行了新的探索。     

引信静态试验模拟动态试验研究

研究了用静态试验评价无线电引信质量性能的方法。分析了静态试验项目、样本量的确定,建立了各组件失效与引信失效的对应关系,提出了通过组件的失效信息计算引信失效率的方法。     

舰用锅炉过热器使用寿命的论证

鉴于某型舰用锅炉过热器破损的主因在于其内部腐蚀,而破损的主要方式是由管头的溃烂开始直至整个管头烂掉为止,导致管子的胀接松动而漏泄。因此,过热器的使用年限全取决于管头的腐蚀速度。通过确定过热器内管头的腐蚀率、锅炉年内运行时间以及保养时间等要素来估算过热器的使用寿命。     

The “signature” of a coherent system and its application to comparisons among systems

Various methods and criteria for comparing coherent systems are discussed. Theoretical results are derived for comparing systems of a given order when components are assumed to have independent and identically distributed lifetimes. All comparisons rely on the representation of a system's lifetime distribution as a function of the system's “signature,” that is, as a function of the vector p= (p₁, … , p_n), where p_i is the probability that the system fails upon the occurrence of the ith component failure. Sufficient conditions are provided for the lifetime of one system to be larger than that of another system in three different senses: stochastic ordering, hazard rate ordering, and likelihood ratio ordering. Further, a new preservation theorem for hazard rate ordering is established. In the final section, the notion of system signature is used to examine a recently published conjecture regarding componentwise and systemwise redundancy. © 1999 John Wiley & Sons, Inc. Naval Research Logistics 46: 507–523, 1999